SUMITOMO PLANETARY GEAR REDUCTION UNIT, ROBOT ~Origin~ gear pump is a rotary pump that relies on the working volume change and movement between the pump cylinder and the meshing gear to deliver the liquid or to pressurize it. The two gears, the pump body and the front and rear cover to form two enclosed spaces.
When the gear rotates, the volume of the space on the gear off side becomes small and forms a vacuum to suck the liquid, and the volume of the space on the gear meshing side changes from large to large Small, and the liquid into the pipe to go.
The suction chamber and the discharge chamber are separated by the meshing lines of the two gears. The pressure at the discharge port of the gear pump depends entirely on the resistance at the pump outlet.
The concept of the gear pump is very simple, that is, its most basic form is the same size of the two gears in a tight fit with the internal rotation of the shell, the shell of the internal similar to the "8" shape, the two gear mounted inside , The outer diameter of the gear and the two sides with the shell closely. The material from the extruder enters the middle of the two gears at the suction port and fills the space, moving along the housing as the teeth rotate, and finally discharging when the teeth are engaged.
Our Company is proud to support our quality products with SUMITOMO PLANETARY GEAR REDUCTION UNIT, ROBOT ~Origin~ services before and after the sale.
We have Regional Sales Managers that will work with you to identify opportunities, review requirements, provide training and assist with forecasting and commercial
concerns. Our Industry Service Specialists will take it to the next level by providing field services such as; SUMITOMO PLANETARY GEAR REDUCTION UNIT, ROBOT ~Origin~ inspections, hands on training and
assistance with installation, inspection, maintenance, reinstallation, field repair and/or factory reconditioning.
We can provide complete SUMITOMO PLANETARY GEAR REDUCTION UNIT, ROBOT ~Origin~ application review by combining the efforts of your operations and maintenance personnel with our design and application
engineers. Our Industry Service Specialist’s comprehensive review of the bearings to be inspected or removed from service to determine where you will best benefit
from making improvements.
This total approach of application, equipment, products and maintenance will lead to Our company’s goal of helping you establish the best practices for your specific
situation resulting in the best value and return on bearing and maintenance expense through improved performance and reduced downtime.
SUMITOMO PLANETARY GEAR REDUCTION UNIT ~NEW~SURPLUS~
(1) P/N: FR75-ZJ02-179
Other P/N: 60216-1063B/8882791608
Total Wt: 105 Lb(s)/Ref #: 150 O
*(Items paid by personal or business checks may take longer to be shipped)*
Payment is expected within 7 days of the auction closing.
Because of past history with winning bidders non-payments,
unless stated that payment will be late for an acceptable reason within a timely manner,
we will be forced to leave negative feedback.
Although we greatly appreciate buyers that figure out their own shipping, and pay immediately;
unfortunately it generally causes problems. Please wait until we send you your invoice to pay. Thank You.
SHIPPING & HANDLING:
All items below 150 Lbs. will be shipped via " United Parcel Service" (UPS) Ground. Unless other provisions are necessary. We will ship world wide.
R.P. Machine is responsible for the initial shipping cost only. All other duties and charges are the responsibility of the buyer.
Shipping is calculated via the Ebay shipping calculator, using UPS Ground rate.
All items have an additional handling charge which will range from between $2.00 and $20.00 depending on the fragility and special packing needs of your items.
We need to know if we will be shipping to a business or residential address so that we may better calculate shipping cost.
Items above 150 Lbs. will be shipped via freight carrier. Shipping and handling fees may vary by weight and special materials needs.
IN THE EVENT OF A DAMAGED SHIPMENT:
If an item should arrive to the winning bidders address broken, an insurance or return claim may be made if the following provisions are met:
Pictures taken of the damaged items box as well as the item itself. So that we know what condition the item was in before its return to our facility.
Once you have taken the pictures, please e-mail us at email@example.com and report the damage as soon as possible.
Steps will then be taken to quickly and efficiently resolve the issue.
Note: If you have any questions, please e-mail or call Robert @ (440) 813-0920. Thanks!
Sumitomo in the mainland of the cooperation process, to absorb a large number of cooperation agencies, to promote the hydraulic pump, motors, cylinders, hydraulic valves and other products flow, our company is a professional sales agent SUMITOMO Sumitomo spare parts products. Sumitomo Sumitomo products with a full range, low prices, fast delivery, after-sales service is guaranteed and other advantages, with the domestic SUMITOMO Sumitomo distributors, production plants, the use of customers, the establishment of a long-term supply and trust relationship. At the same time in order to shorten the delivery period to ensure that the customer's personal interests, but also specifically established SUMITOMO Sumitomo common spare parts