SM-CYCLO CVHJ Sumitomo Cyclo Speed Gear Reducer CVHJ-4195DBY-1
65 gear pump is a rotary pump that relies on the working volume change and movement between the pump cylinder and the meshing gear to deliver the liquid or to pressurize it. The two gears, the pump body and the front and rear cover to form two enclosed spaces.
When the gear rotates, the volume of the space on the gear off side becomes small and forms a vacuum to suck the liquid, and the volume of the space on the gear meshing side changes from large to large Small, and the liquid into the pipe to go.
The suction chamber and the discharge chamber are separated by the meshing lines of the two gears. The pressure at the discharge port of the gear pump depends entirely on the resistance at the pump outlet.
The concept of the gear pump is very simple, that is, its most basic form is the same size of the two gears in a tight fit with the internal rotation of the shell, the shell of the internal similar to the "8" shape, the two gear mounted inside , The outer diameter of the gear and the two sides with the shell closely. The material from the extruder enters the middle of the two gears at the suction port and fills the space, moving along the housing as the teeth rotate, and finally discharging when the teeth are engaged.
Our Company is proud to support our quality products with SM-CYCLO CVHJ Sumitomo Cyclo Speed Gear Reducer CVHJ-4195DBY-1
65 services before and after the sale.
We have Regional Sales Managers that will work with you to identify opportunities, review requirements, provide training and assist with forecasting and commercial
concerns. Our Industry Service Specialists will take it to the next level by providing field services such as; SM-CYCLO CVHJ Sumitomo Cyclo Speed Gear Reducer CVHJ-4195DBY-1
65 inspections, hands on training and
assistance with installation, inspection, maintenance, reinstallation, field repair and/or factory reconditioning.
We can provide complete SM-CYCLO CVHJ Sumitomo Cyclo Speed Gear Reducer CVHJ-4195DBY-1
65 application review by combining the efforts of your operations and maintenance personnel with our design and application
engineers. Our Industry Service Specialist’s comprehensive review of the bearings to be inspected or removed from service to determine where you will best benefit
from making improvements.
This total approach of application, equipment, products and maintenance will lead to Our company’s goal of helping you establish the best practices for your specific
situation resulting in the best value and return on bearing and maintenance expense through improved performance and reduced downtime.
SM-CYCLO CVHJ Sumitomo Cyclo Speed Gear Reducer CVHJ-4195DBY-165
Condition: New Take Out (installed in machine mock-up but never used)Model: CVHJ-4195DBY-165Ratio: 165Service Factor: 1.0Input: 11.7RPM: 1750Output Torque: 59000S/N: A728710Shaft: VerticalHousing Style: FootInput Connection: C-Face AdapterFrame Size: 4195Output Shaft: 3 5/8" D x 5.0" LInput Shaft: 7/8" D x 1 3/8" LC-Face Bell housing: 5" on center mounting holesAdapter Plate: 4.5" on center mounting holesMounting Holes - 15" center to center Front to Back
Forany product defect within the first 30 days after receiving the product, pleasereturn the product to Bishop International Inc. Contact customerservice for a Return Material Authorization number 330-836-6947 8-5M-F EST
BishopInternational Inc. does not administer any manufacturer warranties. Forany defective product past 30 days of receiving the product, please contact themanufacturer regarding their warranty.
If for anyreason you are unhappy with your purchase you may return the item to BishopInternational Inc. within 30 days of receipt of the item for a full refund, notincluding shipping. Item must be in new / unused condition. Shipping is not refunded. Please contactcustomer service for a Return Material Authorization Number at 330-836-6947 8-5M-F EST
Pleasefeel free to call our office: Mon – Fri 8-5 EST 330-836-6947
Emailus your ship to address for a quote.
INSPECTION / LOCALPICK-UP:
Youare welcome to visit our warehouse to inspect an item or to pick-up yourpurchase. Please call our office for anappointment. Sales tax is collected onall local pick up items unless proof of exemption is provided.
Thankyou for the opportunity to serve your business!
Sumitomo in the mainland of the cooperation process, to absorb a large number of cooperation agencies, to promote the hydraulic pump, motors, cylinders, hydraulic valves and other products flow, our company is a professional sales agent SUMITOMO Sumitomo spare parts products. Sumitomo Sumitomo products with a full range, low prices, fast delivery, after-sales service is guaranteed and other advantages, with the domestic SUMITOMO Sumitomo distributors, production plants, the use of customers, the establishment of a long-term supply and trust relationship. At the same time in order to shorten the delivery period to ensure that the customer's personal interests, but also specifically established SUMITOMO Sumitomo common spare parts