Origin SURPLUS SUMITOMO HM 3225/14 TL CONCENTRIC REDUCER, 7569 RATIO, 2HP 1800RPM gear pump is a rotary pump that relies on the working volume change and movement between the pump cylinder and the meshing gear to deliver the liquid or to pressurize it. The two gears, the pump body and the front and rear cover to form two enclosed spaces.
When the gear rotates, the volume of the space on the gear off side becomes small and forms a vacuum to suck the liquid, and the volume of the space on the gear meshing side changes from large to large Small, and the liquid into the pipe to go.
The suction chamber and the discharge chamber are separated by the meshing lines of the two gears. The pressure at the discharge port of the gear pump depends entirely on the resistance at the pump outlet.
The concept of the gear pump is very simple, that is, its most basic form is the same size of the two gears in a tight fit with the internal rotation of the shell, the shell of the internal similar to the "8" shape, the two gear mounted inside , The outer diameter of the gear and the two sides with the shell closely. The material from the extruder enters the middle of the two gears at the suction port and fills the space, moving along the housing as the teeth rotate, and finally discharging when the teeth are engaged.
Our Company is proud to support our quality products with Origin SURPLUS SUMITOMO HM 3225/14 TL CONCENTRIC REDUCER, 7569 RATIO, 2HP 1800RPM services before and after the sale.
We have Regional Sales Managers that will work with you to identify opportunities, review requirements, provide training and assist with forecasting and commercial
concerns. Our Industry Service Specialists will take it to the next level by providing field services such as; Origin SURPLUS SUMITOMO HM 3225/14 TL CONCENTRIC REDUCER, 7569 RATIO, 2HP 1800RPM inspections, hands on training and
assistance with installation, inspection, maintenance, reinstallation, field repair and/or factory reconditioning.
We can provide complete Origin SURPLUS SUMITOMO HM 3225/14 TL CONCENTRIC REDUCER, 7569 RATIO, 2HP 1800RPM application review by combining the efforts of your operations and maintenance personnel with our design and application
engineers. Our Industry Service Specialist’s comprehensive review of the bearings to be inspected or removed from service to determine where you will best benefit
from making improvements.
This total approach of application, equipment, products and maintenance will lead to Our company’s goal of helping you establish the best practices for your specific
situation resulting in the best value and return on bearing and maintenance expense through improved performance and reduced downtime.
Type : CONCENTRIC
HP : 2
Ratio : 7569
RPM : 1800
Model No : HM 3225/14 TL
Configuration : HOR
Enclosure : TEFC
Shaft Type : SOLID
Output Shaft Diameter (In) : 4.625
Torque (In Lb) : 108000
Serial No : A552132
With torque limiter
Reference Number : #86371
THIS ITEM QUALIFIES FOR SAME DAY SHIPPING
SUBJECT TO PRIOR SALE
All shipping is determined per item. Contact us with your shipping information for a quote.
Valley Equipment Company, Inc.
3903 West Market Street
Johnson City, TN 37604
Hours: Mon-Fri 8am- 5pm EST
Phone: (423) 753-3541 or (800) 832-3541
Fax: (423) 753-3589
Seller warrants that it is the true and lawful owner of the equipment, that the same is free from all encumbrances, and that seller has a lawful right to sell same. SELLER MAKES NO REPRESENTATION OR WARRANTY THAT THE EQUIPMENT IS MERCHANTABLE OR THAT IT IS FIT FOR A PARTICULAR PURPOSE. Except as here stated all warranties, express or implied, are excluded. Seller shall not be liable to purchaser, or any other person, for an indirect or inconsequential damage arising out of sale or use of the equipment. Buyer has inspected the equipment, or waived such inspection, and is satisfied with the condition thereof. Buyer assumes all risk and agrees to indemnify and hold harmless the seller against all claims and liability arising out of any condition, property or use of the equipment whether or not the claims and liability are for negligence of seller.
Sumitomo in the mainland of the cooperation process, to absorb a large number of cooperation agencies, to promote the hydraulic pump, motors, cylinders, hydraulic valves and other products flow, our company is a professional sales agent SUMITOMO Sumitomo spare parts products. Sumitomo Sumitomo products with a full range, low prices, fast delivery, after-sales service is guaranteed and other advantages, with the domestic SUMITOMO Sumitomo distributors, production plants, the use of customers, the establishment of a long-term supply and trust relationship. At the same time in order to shorten the delivery period to ensure that the customer's personal interests, but also specifically established SUMITOMO Sumitomo common spare parts