Address：4 Pemimpin Drive #03-09, Lip Hing Industrial Building Singapore 576147
piston motors 40MCM14-1B Series Axial Piston Motor
piston motors is an actuator of a hydraulic system that converts the liquid pressure supplied by the hydraulic pump into the mechanical energy (torque and speed) of its output shaft.
Axial piston hydraulic motor is mainly used in injection molding machinery, ships, lifting machine, construction machinery, construction machinery, coal mining machinery, mining machinery, metallurgical machinery, ship machinery, petrochemical, port machinery.
Axial plunger hydraulic motor has its inertia than the plunger motor is small, but the anti-pollution ability than the gear motor, and the speed can not be too high, generally 200r / min below work. Leakage motor due to the larger leakage, so the load changes or low speed instability.
MCM14-1B Series Axial Piston MotorQuantitative swashplate axial piston motor MCM14-1B FeaturesQuantitative swashplate axial piston motorMCM14-1Bis using oil distribution plate of oil distribution, block rotating
axial plunger pump. Quantitative swashplate axial piston motor
MCM14-1B due to sliding boots and variable between head, oil
distribution plate and cylinder adopts the hydraulic structure of
static equilibrium, and compared with other types of plunger pump,
quantitative swashplate axial piston motor MCM14-1B has a simple
structure, small volume, high efficiency, long life, light weight,
strong self-priming capacity, etc.Quantitative swashplate axial piston pump/motor MCM14-1B is
suitable for the machine tool machine, suitable for forging
machinery, applicable to the metallurgical machinery, is suitable
for engineering machinery, suitable for mining machinery, is
suitable for wind power machinery and other hydraulic transmission
system. Quantitative inclined.Quantitative swashplate axial piston motorMCM14-1BUse notice:Quantitative swashplate axial piston motor MCM14-1B pump rotate to,
according to clockwise rotate to () from the view of shaft end
users need to counter clockwise rotate to or do motor, must when
ordering.Quantitative swashplate axial piston motor MCM14-1B and with
elastic coupling between motor, and requires concentric, otherwise
it will produce noise, lower efficiency and other failures.Quantitative swashplate axial piston pump/motor MCM14-1B
self-priming ability to a certain extent, can be installed in the
fuel tank used above, height is not more than 0.5 M. But for the
flow rate is greater than 160 l/min recommends to flow backward
self-priming pump.Quantitative swashplate axial piston pump/motor MCM14-1B in the
first start, must through drainage hole to the pump housingMCM14-1B Series Axial Piston Motor DrawingMCM14-1B Series Axial Piston Motor Specification:
When the valve with internal leakage failure disintegrates, it is found that the sealing surface of the valve core seat is damaged, which is characterized by dense medium scouring grooves. In the closed state, the valve medium can still leak along the...
According to the analysis of protective components used in agricultural machinery, the leakage control of hydraulic cylinder is mainly piston seals. From the point of view of inspection, specific inspections should be carried out for different types. For...
The swash plate axial piston pump on the traditional research on the flow characteristics and pressure characteristics in low speed conditions, to improve the series piston pump, which can meet in low-speed conditions as power element pump control system...