Address：4 Pemimpin Drive #03-09, Lip Hing Industrial Building Singapore 576147
Model:10x40 universal hydraulic
Country/Region of Manufacture:United States
UPC:Does not apply
Showtime Fabrication is pleased to offer this heavy duty thumb for most excavators and backhoes in the approximate 12-16k weight classes. Constructed from hardened 0.75" AR400 steel plate (certified and made in the USA), this thumb features a large 2.0" main pivot pin, 3"x20" 3000psi welded cylinder with 1.5" induction hardened rod, 1.5" heat treated 4140 steel pins, and a hardline to relocate the front port to the rear of the cylinder to eliminate abrasions in this area. The thumb has a heavy duty full length base plate, not a cheap two piece, and specially designed large serrated tines are ideal for handling boulders, stumps, logs, and demolition debris. Range of motion is from 15-130 degrees. Please note the thumb is not fully retracted in the photo shown on the CASE CX75. It does fold up nice and tight to the stick. All pivot points have grease fittings for easy maintenance. Tines on this thumb are 40" from tip to pivot center. Simply weld into position and get to work. Many other sizes available so let us know if you need a different width or length. All parts of this thumb are proudly made in the USA! Baseplate is 51.5" long and 5" wide. We offer many different configurations and options so let us know what you have and well get you setup with what will work best for your specific machine.
We build many of our thumbs specifically to your machine for perfect fit so the eBay item quantity and ETA may not be accurate. Please contact us to ensure fitment on your specific machine and availability. Weight is about 290 lbs. Freight is generally about $120-220 to a commercial address in the lower 48, but please send us your zip code so we can get you an accurate freight quote to your specific location. For customer service or if this is not exactly what you are looking for, just call us 651-21three-0284. We can make any length, width, and tine configuration you need as well as thumbs for larger and smaller machines. We are more than happy to help you size one for your machine.We also do progressive linkage thumbs and other heavy equipment attachments. Have a great day and thanks for looking! Showtime Fabrication
When the valve with internal leakage failure disintegrates, it is found that the sealing surface of the valve core seat is damaged, which is characterized by dense medium scouring grooves. In the closed state, the valve medium can still leak along the...
According to the analysis of protective components used in agricultural machinery, the leakage control of hydraulic cylinder is mainly piston seals. From the point of view of inspection, specific inspections should be carried out for different types. For...
The swash plate axial piston pump on the traditional research on the flow characteristics and pressure characteristics in low speed conditions, to improve the series piston pump, which can meet in low-speed conditions as power element pump control system...