Sumitomo Cyclo gearmotor CNHM-1H-6095YB-6, 292 rpm, 6:1, 15hp, 230/460, inline

Sumitomo Cyclo gearmotor CNHM-1H-6095YB-6, 292 rpm, 6:1, 15hp, 230/460, inline gear pump is a rotary pump that relies on the working volume change and movement between the pump cylinder and the meshing gear to deliver the liquid or to pressurize it. The two gears, the pump body and the front and rear cover to form two enclosed spaces.
When the gear rotates, the volume of the space on the gear off side becomes small and forms a vacuum to suck the liquid, and the volume of the space on the gear meshing side changes from large to large Small, and the liquid into the pipe to go.
The suction chamber and the discharge chamber are separated by the meshing lines of the two gears. The pressure at the discharge port of the gear pump depends entirely on the resistance at the pump outlet.
The concept of the gear pump is very simple, that is, its most basic form is the same size of the two gears in a tight fit with the internal rotation of the shell, the shell of the internal similar to the "8" shape, the two gear mounted inside , The outer diameter of the gear and the two sides with the shell closely. The material from the extruder enters the middle of the two gears at the suction port and fills the space, moving along the housing as the teeth rotate, and finally discharging when the teeth are engaged.
Our Company is proud to support our quality products with Sumitomo Cyclo gearmotor CNHM-1H-6095YB-6, 292 rpm, 6:1, 15hp, 230/460, inline services before and after the sale.
We have Regional Sales Managers that will work with you to identify opportunities, review requirements, provide training and assist with forecasting and commercial concerns. Our Industry Service Specialists will take it to the next level by providing field services such as; Sumitomo Cyclo gearmotor CNHM-1H-6095YB-6, 292 rpm, 6:1, 15hp, 230/460, inline inspections, hands on training and assistance with installation, inspection, maintenance, reinstallation, field repair and/or factory reconditioning.
We can provide complete Sumitomo Cyclo gearmotor CNHM-1H-6095YB-6, 292 rpm, 6:1, 15hp, 230/460, inline application review by combining the efforts of your operations and maintenance personnel with our design and application engineers. Our Industry Service Specialist’s comprehensive review of the bearings to be inspected or removed from service to determine where you will best benefit from making improvements.
This total approach of application, equipment, products and maintenance will lead to Our company’s goal of helping you establish the best practices for your specific situation resulting in the best value and return on bearing and maintenance expense through improved performance and reduced downtime.

Qty-1-In stock at time of original listing, Sumitomo Cyclo gearmotor, Sumitomo, CNHM-1H-6095-YB-6, 6:1, 6:1, ratio, 230/460vac, 230/460, 3 phase, 1.5hp, 1.5 hp, 1-1/2hp, 1-1/2 hp, 292 output rpm, 292rpm, 1750/292, 1750 rpm motor, CNHM-1H-6095-YB-6, CNHM-1H-6095-YA-6, model CNHM-1H-6095YB-6 gear motor, inline output, B3, M1, or any other position, CNHM1H-6095Y-6, #CNHM-1H-6095-YB-6, 6:1 ratio, 6:1, same as CNHM-1H-4095YB-6, CNHM-1H-4095Y-6, CNHM1H-4095YA-6, CNHM-1H-6090Y-6, CNHM1H-6090YB-6, CNHM-1H-6090YA-6, 6090. 6095. 4090, 4095, 4097, 3090, 3095, HM3095-6, HM3095A-6. HM3095, HM3095B-6, reducer, speed reducer, Sumitomo, combination reduction, helical inline, concentric, helical speed reducer, helical gearmotor, gear motor, integral gear motor, gearmotor, double reduction, Cyclo gear, For more information call Mike Burvan @ 219-922-2668, burv@jorsm.com or visit http://midwestpowerproducts.com/inventory.html

If you need this unit converted to something, different style, different ratio, call us and we can probably figure it out.

**These unit will be cleaned up nice and test run before shipping.

Our stock #ING199

HP: 1.5, 1.50. 1-1/2, 1 1/2

Ratio: 6:1

Output speed: 292

Center distance: N/A

C-face size: N/A

Volts: 230/460

Phase: 3

Motor Enclosure: TEFC

Mounting: Foot

Output assembly: Inline

Brake: N/A

Output bore size: N/A

Manufacturer: Sumitomo, Cyclo

Model #CNHM-1H-6095-YB-6, CNHM1H-6095YB-6

Notes: Good shape, we will test and clean up before shipping.

Sumitomo in the mainland of the cooperation process, to absorb a large number of cooperation agencies, to promote the hydraulic pump, motors, cylinders, hydraulic valves and other products flow, our company is a professional sales agent SUMITOMO Sumitomo spare parts products. Sumitomo Sumitomo products with a full range, low prices, fast delivery, after-sales service is guaranteed and other advantages, with the domestic SUMITOMO Sumitomo distributors, production plants, the use of customers, the establishment of a long-term supply and trust relationship. At the same time in order to shorten the delivery period to ensure that the customer's personal interests, but also specifically established SUMITOMO Sumitomo common spare parts